How to manage your dmConnect divert settings
Set where calls to this number should be diverted. Always click Save to activate any changes you make.
Note: changes to the type of divert destination (PSTN/VoIP) may take a few seconds to take effect
VoIP forwarding
This is where you set ip forwarding of your calls via VoIP. Check the box to enable the feature.
Protocol
- SIP - A widely used protocol for VoIP. Fairly simple to setup but can struggle to get through firewalls / routers.
- IAX2 - A protocol most closely associated with the Asterisk Open Source PABX package (and derivatives thereof). Slightly more complex setup but designed to improve access through firewalls / routers.
SIP Parameters
- Host - the address of your VoIP server/PABX in dot-decimal notation (e.g. 87.215.32.121) or hostname (e.g. pabx.acmeproducts.com).
- DTMF - Whether DTMF tones should simply appear in the audo stream (in-band) or as explicit protocol signalling (RFC 8322). This setting often doesn't matter, but if you are having trouble with a tone-driven application on your system, changing this setting may help.
IAX2 Parameters
- Username - the IAX2 username (sometimes referred to as "user context")
- Password - the IAX2 password (sometimes referred to as "secret")
- Host - the address of your VoIP server/pabx in dot-decimal notation (e.g. 87.215.32.121) or hostname (e.g. pabx.acmeproducts.com).
PSTN Forwarding
This is the telephone number to forward calls to via the PSTN (Public Switched Telephone Network). You can enter this in international format (e.g. +44-20-7060-2000, +1-212-123-3214), but it will always be displayed as if dialled from the UK (e.g. 020-7060-2000, 00-12121233214).
You can have both VoIP and PSTN enabled, but VoIP will always be tried first. Only if the VoIP call failed (e.g. your Internet connection is down or the PABX is not working) will the PSTN destination be tried.
Troubleshooting VoIP
VoIP can be tricky. If you want to check the number itself is working and you have doubts about your server setup or its connectivity, try our test service:
SIP Testing Parameters
| Protocol | SIP |
| Host | voiptest.dmclub.net |
| DTMF | In-band |
IAX2 Testing Parameters
| Protocol | IAX2 |
| Username | test |
| Password | test |
| Host | voiptest.dmclub.net |
Calls should be answered immediately with a "congratulations" message followed by an echo-test (the system plays back to you what it hears as quickly as it can - usually within about 0.2s).
For more information on VoIP diverts and configuring your SIP server, see dmNote 3511: Getting Started with VoIP.
0800 Payphone Access
Customers wishing to allow access from payphones to their 0800 numbers must contact support to enable this feature. There is an industry-wide surcharge of 15ppm (ex VAT) that apply to these calls.
Note that this facility is only currently available to dmConnect numbers diverting to VoIP. Contact us if you have a requirement for payphone access with other services.